Даниил Грабарь
79d88db930
- Created a new document for the Station interface, detailing its menu structure, process data, safety functions, frames, and smartPAD function buttons. - Added a document for RobotPowerControl, explaining its purpose for safely shutting down or restarting the KUKA Sunrise Cabinet controller. - Introduced ServerFriRos2 documentation, outlining its role in establishing an FRI connection between the KUKA LBR iiwa and a ROS 2 computer. - Documented the TeachKuka application, which allows manual teaching of the KUKA LBR iiwa, including position capturing and trajectory recording. - Added an overview of Sunrise Workbench, including installation instructions for Windows and Linux. - Created a section on installing a Windows compatibility tool (PortProton) on Linux. - Documented the installation process for SunriseWorkbench on Linux using PortProton. - Added installation instructions for SunriseWorkbench on Windows. - Created troubleshooting documentation for configuration errors and SSL errors during installation. - Implemented a hook to generate the shared PDF only during the default-language build.
86 lines
3.4 KiB
Markdown
86 lines
3.4 KiB
Markdown
# Installing libraries
|
|
|
|
Additional libraries distributed as `.zip` archives must be installed for the SunriseWorkbench project to work fully.
|
|
|
|
!!! note "Prerequisite"
|
|
Before installing the libraries, make sure that the project has been created or loaded. See [Creating a new project](new-project.md) or [Loading an existing project](load-project.md).
|
|
|
|
## Opening the settings
|
|
|
|
In the SunriseWorkbench main menu, select **Window → Preferences**. In the window that opens, go to **Install/Update → Available Software Sites**.
|
|
|
|
|
|
|
|
## Adding library archives
|
|
|
|
Click **Add**. In the dialog, click **Archive...** and add a library `.zip` archive.
|
|
|
|
|
|
|
|
### Windows users
|
|
|
|
Use the standard file-selection dialog to locate and select the archive.
|
|
|
|
### Linux users
|
|
|
|
Because SunriseWorkbench runs in an emulated Windows environment, use the following procedure to access the Linux file system:
|
|
|
|
1. In the file-selection dialog, click **Look in:** and select **My Computer**.
|
|
|
|
|
|
|
|
2. A list of mounted drives appears. It may contain more entries than the number of physical drives because of how the compatibility environment works.
|
|
|
|
|
|
|
|
3. Check each drive in turn. One of them contains the Linux file system (drive H in this example).
|
|
|
|
|
|
|
|
4. Open the directory containing the libraries, select one of the `.zip` archives, and click **OK**.
|
|
|
|
|
|
|
|
5. Confirm the selected archive by clicking **OK** in the next window.
|
|
|
|
|
|
|
|
## Adding the remaining archives
|
|
|
|
The archive appears in the **Available Software Sites** list. Repeat the procedure for every remaining library `.zip` file.
|
|
|
|
|
|
|
|
After adding all archives, click **OK** to save the settings.
|
|
|
|
## Installing the libraries
|
|
|
|
Select **Help → Install New Software...** from the menu. In the **Work with** field, select **All Available Sites**. Components from all added archives appear in the list.
|
|
|
|
|
|
|
|
Select every available component and click **Next**. Review the installation summary and click **Next** again.
|
|
|
|
|
|
|
|
Accept the license agreements and click **Finish** to begin installation.
|
|
|
|
|
|
|
|
!!! warning "Installation duration"
|
|
Installing the libraries may take a significant amount of time. Do not interrupt the process.
|
|
|
|
|
|
## Restarting the application
|
|
|
|
When installation finishes, SunriseWorkbench prompts you to restart. Click **Restart Now**.
|
|
|
|
|
|
|
|
After the restart, the interface switches to Russian and all installed libraries appear in `StationSetup.cat`.
|
|
|
|
|
|
|
|
!!! tip "Next step"
|
|
If the project has not yet been configured, see [Creating a new project](new-project.md) or [Loading an existing project](load-project.md).
|